CDMQV - 5-MINUTE EPOXY GEL RESIN
- MSDS: CDMQV
- Manufacturer: ITW DEVCON CORP
- Product Name: 5-MINUTE EPOXY GEL RESIN
- National Stock Number: 8040-00N016978
Product Identification
Product ID:5-MINUTE EPOXY GEL RESIN
MSDS Date:12/21/1988
FSC:8040
NIIN:00N016978
MSDS Number: CDMQV
Responsible Party
DANVERS, MA 01923
US
Emergency Phone: 508-777-1100
Info Phone: 508-777-1100
Cage: EO352
Contractor
Telephone: 508-777-1100
Cage: EO352
Ingredients
BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL A
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: >60%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT): 11.4 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN: MILD IRRITATION.
CHRONIC: MODERATE SKIN SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA, SKIN CONDITIONS.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTETION. SKIN: WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION IF
IRRITATION PERSISTS. INHALATION: REMOVE TO FRESH AIR. ADMINISTER
OXYGEN I F BREATHING IS DIFFICULT. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. ADMINISTER TWO GLASSES OF WATER.
GET MEDICAL ADVICE.
Fire Fighting
Flash Point Method:PMCC
Flash Point:400F,204C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . POLYMER FOAMS FOR LARGE FIRES.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:PREVENT SKIN & EYE CONTACT. SCRAPE UP &
DISCARD IN SUITABLE CONTAINERS. USE ABSORBENT MATERIAL IF
NECESSARY. WASH SPILL AREA W/AN INDUSTRIAL CLEANING AGENT. IF A
SOLVENT IS USED FOR CLEANING, TAKE PRE CAUTIONS AGAINST FIRE AND
PERSONAL OVEREXPOSURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE IN
ACCORDANCE WITH THE POTENTIAL HAZARD OF THE CURING AGENT USED.
Other Precautions:WHEN MATERIAL IS SANDED OR MACHINED, USE PROPER
PRECAUTIONS.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR ADEQ PROT EQUIP TO PREVENT OVEREXPOSURE TO AIRBORNE
PARTICULATE.
Work Hygienic Practices:REMOVE CONTAM CLTHG & PROT GEAR. LAUNDER/DRY
CLEAN BEFORE REUSE. DESTROY LEATHER ARTICLES, INCL SHOES THAT (SUP
DAT)
Supplemental Safety and Health
HYGIENE PRACT: CANNOT BE DECONTAMINATED. WASH THORO AFTER USING,
PARTICULARLY BEFORE EATING/SMOKING.
Chemical Properties
Vapor Pres:NIL @ 78F
Vapor Density:>1
Spec Gravity:1.2
pH:7.0
Solubility in Water:NIL
Appearance and Odor:BLUE GEL WITH FAINT ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:OPEN FLAME AND EXCESSIVE HEAT,
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES AND ACIDS
FROM INCOMPLETE COMBUSTION.
Disposal
Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE WITH STATE AND LOCAL REGULATIONS. DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.